Why Choose Heritage Single Vision Lenses?
Single vision lens supply built around prescription accuracy, practical customization and reliable repeat ordering.
Accurate RX Processing
Every order is reviewed before production to reduce RX errors and support consistent finished-lens results.
Flexible Material & Coating Solutions
Select the appropriate combination based on prescription, frame data and customer requirements.
Reliable Supply Support
Flexible production support for independent optical stores, laboratories and wholesale programs.
Practical B2B Supply
Start from free prescription samples after technical review, then discuss repeat ordering, packaging and special engraving marks.
Who We Support
Single Vision Lens Options for Different Customer Needs
Select the appropriate single vision lens design, material, treatment and finishing service from the prescription, frame, intended use and destination-market requirements.
A practical clear-lens material option for suitable standard prescriptions and everyday optical use.
Higher-index material options considered with prescription power, frame size and thickness targets.
Clear indoor vision with automatic outdoor darkening, subject to material and RX availability.
Prescription sun-lens option with polarized glare control where the full specification is feasible.
Compatible low-reflection AR treatment for approved single-vision lens systems. An SDC-tested Heritage coating sample recorded reflectance as low as 0.45%; actual results vary by specification and test conditions.
Prescription sun configuration with decorative mirror coating options for suitable lens combinations.
Freeform Single Vision Design and Production
Freeform single vision lenses are digitally surfaced from the submitted RX and selected design. When supported by the design, monocular PD, fitting height and position-of-wear data can be incorporated into the calculation.
This should not be confused with simply edging a standard finished lens. The laboratory confirms the required data and production route before manufacturing.
Materials, Coatings and Order Configuration
Choose material/index, diameter, coating, tint and finishing service together. Prescription power and frame size influence thickness, weight and blank selection, while not every treatment is available in every material.
- CR-39, polycarbonate and suitable higher-index options
- Clear, photochromic, polarized and prescription-tint configurations
- Hard coating, anti-reflective, hydrophobic, blue-filter and mirror options
- Uncut or edged-lens production subject to frame data
Single Vision Lenses Wholesale Information
Commercial information for testing a single vision lens program and developing reliable repeat supply.
01
Flexible MOQ
Start from free prescription samples after technical review.
02
RXoffice Online Ordering
Use RXoffice to submit confirmed prescription data and support repeat ordering.
03
Within 48 Hours
Confirmed standard RX orders are produced within 48 hours.
04
Global Delivery
DHL and FedEx delivery options are reviewed for the confirmed destination.
05
OEM & Private Label
Packaging, lens envelopes and labels are confirmed against artwork, language and quantity requirements.
06
Repeat-Order Support
Confirmed specifications and the supported RXoffice workflow help simplify subsequent production orders.
Single Vision Lens Specifications Guide
Compare the required RX and frame data with OptoCalc individualized Single Vision calculation features, materials, treatments and finishing before submitting an order.
- RX & Fitting Data
- OptoCalc Design Options
- Ordering Workflow
| Order input | Required information | Production purpose |
|---|---|---|
| Prescription | R/L SPH, CYL and AXIS; prism and base when prescribed | Defines the optical power required for each eye |
| Optical positioning | Monocular PD; fitting height when required by the design or frame | Positions the optical center relative to the wearer and frame |
| Frame information | A, B, DBL, effective diameter and frame shape/trace for edged orders | Supports diameter, thickness and edging calculations |
| Lens specification | Material/index, diameter, coating, tint and uncut or edging service | Confirms a compatible, manufacturable order |
| Optional position-of-wear data | Vertex distance, pantoscopic tilt and wrap angle when the selected Freeform design uses them | Supports individualized compensation where technically applicable |
Final range, diameter and thickness are confirmed after the complete prescription and frame data have been reviewed.
OptoCalc individualized Single Vision calculation
OptoCalc Single Vision can be calculated as an individualized Freeform product rather than treated only as a standard stock lens. The complete prescription, optical positioning, frame and selected calculation features are reviewed together.
Individualized optimization
Supports distance or near prescriptions, first-time wearers, reading, children and suitable sport-frame applications.
Lenticular Blending
Can reduce thickness and weight outside a defined optical zone when the prescription, frame and design are compatible.
Advanced Ray Tracing
Can be combined with supported Single Vision programs when the required position and design inputs are available.
Materials and indices
- CR-39 for suitable standard prescriptions
- 1.56, 1.60, 1.67 and 1.74 options subject to design and RX availability
- Polycarbonate options for suitable applications
Functional treatments
- Hard coating, anti-reflective and hydrophobic options
- Photochromic, polarized and prescription-tint configurations
- Blue-filter and mirror-coating options where compatible
Material, index, diameter, frame size, calculation feature and coating should be reviewed as one complete lens system.
- Submit the RX: provide right and left SPH, CYL, AXIS and any prism/base requirement.
- Add positioning data: include monocular PD and any design-specific fitting measurements.
- Provide frame data: send A, B, DBL, effective diameter and frame trace for edging.
- Select the lens system: confirm material/index, diameter, coating, tint and finishing service.
- Laboratory review: Heritage checks compatibility and can pre-calculate blank size, base curve and thickness before production.
Single vision lenses provide one prescribed power across the primary optical area and can be used to correct myopia, hyperopia or astigmatism.
A stock lens is selected from a finished power range and edged to the frame. A custom Freeform single vision lens is digitally surfaced for the submitted prescription and selected design, with additional fitting data used where applicable.
Provide R/L SPH, CYL and AXIS, prescribed prism/base information, monocular PD, frame measurements or trace, material/index, diameter, coating, tint and finishing requirement.
A broad range of prescriptions can be reviewed. Material/index, diameter, frame size, optical-center position and expected thickness must be confirmed before production.
Options may include CR-39, polycarbonate and suitable higher-index materials with hard coating, anti-reflective, hydrophobic, photochromic, polarized, tint, blue-filter or mirror treatments. Compatibility depends on the full order.
Yes, where technically feasible. Send accurate frame dimensions and preferably the frame trace so blank size, thickness and edging requirements can be reviewed.
How Heritage Verifies Single Vision Lens Orders
Each order is reviewed as one complete lens system so the prescription, frame information, material, treatment and finishing requirements remain aligned through production.
01
RX Review
Check R/L SPH, CYL, AXIS, prescribed prism or base, monocular PD and required frame information.
02
Design & Blank Selection
Confirm the lens design, material, index, diameter, coating and blank selection as one manufacturable specification.
03
Controlled Production
Surface, polish and apply the confirmed treatments according to the approved order requirements.
04
Final Lens Verification
Review the finished prescription, appearance and finishing requirements against the confirmed order before packing.